Finally found some bleeders @_@ first attempt they were the wrong size 10x1.0mm from memory.Which funny enough is listed for the brakes.
Led to believe there are a few types of nipples for the VR4/Evo
The stock nipple was longer than the one i bought. But it still worked
I am using the 7mmx1.0mm on the front twin pots
Speed Bleeders - SB7100S # M7 X 1.0
<- Old vs new
The pic to the right is the rear lucus caliper nipple. I believe thread is SAE/Inches.
Unlike the metric fronts.
Rears:
M8x1.25mm
Therefore a SB-110311 from stahlbus
Stahlbus Bleeder Valve - Steel (M8x1.25x16mm)
OR
Russell 639520 Speed Bleeder 8mm x 1.25mm Thread 24mm Length
Russell 639570 Caliper Speed Bleeders 7mm x 1.0 Thread x 34mm
OR
Fronts - http://www.speedbleeder.com/size.htm:
SB7100S # M7 X 1.0 - 30.22mm
SB7100 # M7 X 1.0 1.38 - 35.15mm
Rears:
SB8125 M8 X 1.25 1.10, (27.99mm)
SB8125L M8 X 1.25 1.28, (32.54mm)
SB8125LL M8 X 1.25 1.50, (38.09mm)
One man bleeding FTW!
http://www.stahlbus.com also makes bleeders for both brakes and oil sumps ;)
AHHHHHHHHHHHHHHHHHHHHHHHHH
Trying to figure out the rear bleeder screw!!!!!!!!!
----------------------------- DRAFT ----------------------------------------
Rear Brake Pads
S40, V40 1996~ O/E Ref. 30850978 Art No. 40.0978
Caliper, rear
S/V40 1998~ left 8601977 20.1977
right 8601978 20.1978
S/V40 1996~97 left 8602150 20.2150 (30863315) (3345673)
right 8602151 20.2151 (30863316)
Repair Kit Calipers and Brake Master Cylinder (Cont.)
S/V40 54,0mm F.B.C. Lucas 18.4145
38,0mm R.B.C. Lucas 18.4083
Bleeder Screws d = Thread s = Size outer tl= Lenght
d s tl Art No.
M8 x 1,25 9 mm 35,5mm 18.0011
M10 x 1,0 10mm 36,5mm 18.0018
M10 x 1,0 1 mm 30,0mm 18.0039
M7 x 1,0 7 mm 21,7mm 18.0053
M7 x 1,0 7 mm 26,2mm 18.0053
M7 x 1,0 7 mm 28,7mm 18.0069
M7 x 1 7 mm 30,5mm 18.0086
M7 x 1 7 mm 38,3mm 18.0087
1/4" x 28UNF 8 mm 28mm 18.0120
No comments:
Post a Comment